I always enjoy stories about Ada, Pascal, Object Pascal, Prolog, Perl, OCaml, Standard ML, Forth, Pike, Fortran, Scheme, Common Lisp, or some APL derivative in use in the wild.
It’s especially good to see a story about a recent project on a smaller system using Ada.
At a lower level in the formal verification stack than this, it's on the one hand awesome that ARM has published a machine readable architecture specification for the more recent A architectures in ASL... and on the other hand extremely frustrating that they haven't done the same for M.
"For example, the ASL code published through the A-Profile Arm Architecture Reference Manual, Exploration Tools downloads for A-Profile, or the Armv8-M Architecture Reference Manual."
Cortex-M is a lovely platform. Shame it has stagnated. Both STM32H7 (or N6) or NXP RT1170/80 beg for a major update - more performance, inclusion of NEON (or equivalent), support for DDR3 at least, PCIe?
It would be amazing for doing some more complex DSP.
Otherwise using those platforms is a bit like programming on 8086 today. Fun. You get basic stuff done and then you hit a wall. Only option is to jump on SoM stuff or FPGA which is another can of worms in itself.
ST seems to consistently put out faster chips [1]. I think the better question is why bother though? The real reason to use a Cortex-M is determinism in hard real-time systems. I'm sure DDR3 and PCIe would be cool in an MCU and people would certainly make some interesting things with it, but at that point you either aren't making a hard real-time system and would benefit greatly from an MPU, allowing you to run Linux and benefit from the wealth of drivers available for these interfaces, or your real-time deadlines are so tight an FPGA would be a better choice. The real advantage of the Cortex-Ms is that they can be manufactured on ancient process nodes for next to nothing. The moment you don't care about that, why not upgrade to an i.MX8?
> ST seems to consistently put out faster chips [1].
They have not released anything in years, only modest incremental updates. STM32V8 is a welcome update, but it is nothing ground breaking and not available yet.
> The real reason to use a Cortex-M is determinism in hard real-time systems.
Correct.
> but at that point you either aren't making a hard real-time system and would benefit greatly from an MPU
Why not?
> allowing you to run Linux and benefit from the wealth of drivers available for these interfaces
It is precisely to avoid running Linux and the "wealth of drivers".
> or your real-time deadlines are so tight an FPGA would be a better choice
When MCUs were not good enough, the FPGA was a sensible choice. That said you won't get Cortex-M7 core on FPGA and other cores might be available, though there is not going to be any substantial performance improvement, unless you want to spend unreasonable amount of money (talking 5 figures at least).
What I am trying to point out is that there is a huge market gap.
i.MX8 is not realtime and the support for running bare metal code is very much non existent.
> It is precisely to avoid running Linux and the "wealth of drivers".
Why not? I understand not wanting to deal with unnecessary complexity as a hobbyist, but you'll find yourself creating far more complexity trying to implement all of this yourself (and vendors certainly don't want to support you in this).
Secondly, I think the number of customers for chip vendors who are uncomfortable with setting up an embedded Linux environment, but perfectly confident in routing DDR and PCIe signals is approximately 0.
> What I am trying to point out is that there is a huge market gap.
> i.MX8 is not realtime and the support for running bare metal code is very much non existent.
This isn't quite true and is what I'm trying to get at. Most of these embedded SoCs contain a Cortex-M and a Cortex-A (not all but there are quite a lot). High performance DRAM, external PCIe devices, and large internal caches are fantastic for compute performance but most of the things you want to do with a PCIe device (networking, asynchronous compute) don't require cycle-accurate determinism. Generally there isn't much you need to do with such stringent timing requirements, so you can offload that work to secondary Cortex-M33 core with a shared memory interface to the main core and get the best of both worlds.
I see so many systems trying to take advantage of the impressive compute power of modern MCUs (which is really cool!) but often end up just re-inventing the cooperative multitasking OS, but worse.
The easy to obtain FPGAs contain ancient ARM cores, but which are usable for implementing microcontroller tasks.
For example the AMD Xilinx UltraScale+, like in the AMD Kria modules and development kits (3-digit prices), include some Cortex-R5 cores, which provide deterministic operation, like Cortex-M.
Cortex-R5 are somewhat slower than Cortex-M7 at the same clock frequency, but they are available at a higher clock frequency than many Cortex-M7 implementations.
If you can implement some custom peripherals in the FPGA logic array, then you can obtain much higher performance than with a microcontroller alone.
Yes, this will not offer meaningful performance improvement over "native" silicon. I am talking about computational power, access to fast memory etc. not peripherals, which can still be serviced by FPGA.
The AMD Kria modules include 600 MHz dual Cortex-R5 cores and 1.5 GHz quadruple Cortex-A53 cores, and also 4 GB of DDR4 memory.
So they are similar with an older Raspberry Pi and they have far more computational power than a Cortex-M7 or Cortex-M85 CPU, even if they are very slow in comparison with modern Cortex-A7x or Cortex-A7xx cores.
I have never heard of any FPGA containing better CPU cores than Cortex-A78, but even those with Cortex-A78 are extremely expensive, so they may be worthwhile only for their FPGA part, not for a CPU that is much slower than cheaper alternatives.
The same is true even for the cheaper modules with UltraScale+ FPGAs, like AMD Kria, which cost as much as one of the cheaper mini-PCs with a much faster Intel or AMD CPU, so they are worthwhile only if you can implement in the FPGA an essential part of the functionality.
There is however another advantage of the FPGAs with ARM cores, besides implementing fast peripherals with hard real-time requirements.
Unlike with most non-microcontroller ARM CPUs where the vendor keeps secret various things, including the boot loader, so you cannot be absolutely certain about what the vendor does, because ARM has followed the example of Intel and has introduced a potential Trojan horse in its CPUs, i.e. an execution mode controlled by the vendor, which is more privileged than even a hypervisor, in the FPGAs with ARM cores you have complete documentation and absolute control over what the CPU does, so you could implement with greater confidence some devices for which security is important.
I always enjoy stories about Ada, Pascal, Object Pascal, Prolog, Perl, OCaml, Standard ML, Forth, Pike, Fortran, Scheme, Common Lisp, or some APL derivative in use in the wild.
It’s especially good to see a story about a recent project on a smaller system using Ada.
At a lower level in the formal verification stack than this, it's on the one hand awesome that ARM has published a machine readable architecture specification for the more recent A architectures in ASL... and on the other hand extremely frustrating that they haven't done the same for M.
Looks as though ARM is doing ASL for Armv8-M.
"For example, the ASL code published through the A-Profile Arm Architecture Reference Manual, Exploration Tools downloads for A-Profile, or the Armv8-M Architecture Reference Manual."
https://developer.arm.com/architectures/architecture%20speci...
I'll read more later but just keep in mind nucleo is a series of form factors. There's even M33 on a -144 which is ARMv8-M
Cortex-M is a lovely platform. Shame it has stagnated. Both STM32H7 (or N6) or NXP RT1170/80 beg for a major update - more performance, inclusion of NEON (or equivalent), support for DDR3 at least, PCIe?
It would be amazing for doing some more complex DSP.
Otherwise using those platforms is a bit like programming on 8086 today. Fun. You get basic stuff done and then you hit a wall. Only option is to jump on SoM stuff or FPGA which is another can of worms in itself.
ST seems to consistently put out faster chips [1]. I think the better question is why bother though? The real reason to use a Cortex-M is determinism in hard real-time systems. I'm sure DDR3 and PCIe would be cool in an MCU and people would certainly make some interesting things with it, but at that point you either aren't making a hard real-time system and would benefit greatly from an MPU, allowing you to run Linux and benefit from the wealth of drivers available for these interfaces, or your real-time deadlines are so tight an FPGA would be a better choice. The real advantage of the Cortex-Ms is that they can be manufactured on ancient process nodes for next to nothing. The moment you don't care about that, why not upgrade to an i.MX8?
[1] https://www.st.com/content/st_com/en/campaigns/stm32v8-high-...
> Cortex-M is determinism in hard real-time systems
> or your real-time deadlines are so tight an FPGA would be a better choice
That's why I'd say Cortex-M fits well for a very-very good soft real-time (99.99+%). But for hard real-time (100%) you need an FPGA.
> ST seems to consistently put out faster chips [1].
They have not released anything in years, only modest incremental updates. STM32V8 is a welcome update, but it is nothing ground breaking and not available yet.
> The real reason to use a Cortex-M is determinism in hard real-time systems.
Correct.
> but at that point you either aren't making a hard real-time system and would benefit greatly from an MPU
Why not?
> allowing you to run Linux and benefit from the wealth of drivers available for these interfaces
It is precisely to avoid running Linux and the "wealth of drivers".
> or your real-time deadlines are so tight an FPGA would be a better choice
When MCUs were not good enough, the FPGA was a sensible choice. That said you won't get Cortex-M7 core on FPGA and other cores might be available, though there is not going to be any substantial performance improvement, unless you want to spend unreasonable amount of money (talking 5 figures at least).
What I am trying to point out is that there is a huge market gap.
i.MX8 is not realtime and the support for running bare metal code is very much non existent.
> It is precisely to avoid running Linux and the "wealth of drivers".
Why not? I understand not wanting to deal with unnecessary complexity as a hobbyist, but you'll find yourself creating far more complexity trying to implement all of this yourself (and vendors certainly don't want to support you in this). Secondly, I think the number of customers for chip vendors who are uncomfortable with setting up an embedded Linux environment, but perfectly confident in routing DDR and PCIe signals is approximately 0.
> What I am trying to point out is that there is a huge market gap.
> i.MX8 is not realtime and the support for running bare metal code is very much non existent.
This isn't quite true and is what I'm trying to get at. Most of these embedded SoCs contain a Cortex-M and a Cortex-A (not all but there are quite a lot). High performance DRAM, external PCIe devices, and large internal caches are fantastic for compute performance but most of the things you want to do with a PCIe device (networking, asynchronous compute) don't require cycle-accurate determinism. Generally there isn't much you need to do with such stringent timing requirements, so you can offload that work to secondary Cortex-M33 core with a shared memory interface to the main core and get the best of both worlds.
I see so many systems trying to take advantage of the impressive compute power of modern MCUs (which is really cool!) but often end up just re-inventing the cooperative multitasking OS, but worse.
The easy to obtain FPGAs contain ancient ARM cores, but which are usable for implementing microcontroller tasks.
For example the AMD Xilinx UltraScale+, like in the AMD Kria modules and development kits (3-digit prices), include some Cortex-R5 cores, which provide deterministic operation, like Cortex-M.
Cortex-R5 are somewhat slower than Cortex-M7 at the same clock frequency, but they are available at a higher clock frequency than many Cortex-M7 implementations.
If you can implement some custom peripherals in the FPGA logic array, then you can obtain much higher performance than with a microcontroller alone.
Yes, this will not offer meaningful performance improvement over "native" silicon. I am talking about computational power, access to fast memory etc. not peripherals, which can still be serviced by FPGA.
The AMD Kria modules include 600 MHz dual Cortex-R5 cores and 1.5 GHz quadruple Cortex-A53 cores, and also 4 GB of DDR4 memory.
So they are similar with an older Raspberry Pi and they have far more computational power than a Cortex-M7 or Cortex-M85 CPU, even if they are very slow in comparison with modern Cortex-A7x or Cortex-A7xx cores.
I have never heard of any FPGA containing better CPU cores than Cortex-A78, but even those with Cortex-A78 are extremely expensive, so they may be worthwhile only for their FPGA part, not for a CPU that is much slower than cheaper alternatives.
The same is true even for the cheaper modules with UltraScale+ FPGAs, like AMD Kria, which cost as much as one of the cheaper mini-PCs with a much faster Intel or AMD CPU, so they are worthwhile only if you can implement in the FPGA an essential part of the functionality.
There is however another advantage of the FPGAs with ARM cores, besides implementing fast peripherals with hard real-time requirements.
Unlike with most non-microcontroller ARM CPUs where the vendor keeps secret various things, including the boot loader, so you cannot be absolutely certain about what the vendor does, because ARM has followed the example of Intel and has introduced a potential Trojan horse in its CPUs, i.e. an execution mode controlled by the vendor, which is more privileged than even a hypervisor, in the FPGAs with ARM cores you have complete documentation and absolute control over what the CPU does, so you could implement with greater confidence some devices for which security is important.